Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

IEC 60695-2-13:2010 ED2

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
12. 2. 2014.

Опште информације

99.60     24. 8. 2021.

WPUB   

IEC

TC 89

Међународни стандард

13.220.40     29.020  

енглески   француски  

Куповина

Ревидиран

Језик на коме желите да примите документ.

Апстракт

IEC 60695-2-13:2010 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or if sustained and continuous flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This second edition of IEC 60695-2-13 cancels and replaces the first edition published in 2000. It also constitutes a technical revision. The main changes with respect to the previous edition are:
- modified title;
- addition of an Introduction;
- clarification of Scope;
- expansion of Clause 2: Normative references;
- expansion of Clause 3;
- revision of Clause 4 to alignment with the IEC 60695-11 series to introduce guidance on test programs for material variations;
- clarification of Clause 8: Conditioning (now Clause 7);
- deletion of Clause 9: Initial measurement;
- expansion of Clause 10: Test procedures (now Clause 8);
- expansion of Clause 11: Observation and measurement (now Clause 9);
- clarification of Clause 12: Evaluation of test results (now Clause 10);
- expansion of Clause 13: Test report (now Clause 11).
This publication is to be read in conjunction with IEC 60695-2-10:2000. The contents of the corrigendum of February 2012 have been included in this copy.

Животни циклус

ПРЕТХОДНО

ПОВУЧЕН
IEC 60695-2-13:2000 ED1

ТРЕНУТНО

ПОВУЧЕН
IEC 60695-2-13:2010 ED2
99.60 Повлачење ступило на снагу
24. 8. 2021.

ИСПРАВКЕ / ИЗМЕНЕ

ПОВУЧЕН
IEC 60695-2-13:2010/COR1:2012 ED2

ПОВУЧЕН
IEC 60695-2-13:2010/AMD1:2014 ED2

РЕВИДИРАН ОД

ОБЈАВЉЕН
IEC 60695-2-13:2021 ED3