Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

IEC 60534-6:1985 ED1

Industrial-process control valves. Part 6: Mounting details for attachment of positioners to control valve actuators
1. 1. 1985.
95.99 Повучен   8. 10. 2004.

Опште информације

95.99     8. 10. 2004.

IEC

TC 65/SC 65B

Међународни стандард

23.060.40     25.040.40  

енглески   француски  

Куповина

Замењен

Језик на коме желите да примите документ.

Апстракт

Permits a variety of positioning devices which respond to a linear motion to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket.
The standardized mounting applies to positioners which are mounted on the side of the actuator, to those actuators which have a travel of 100 mm or less, and is designed to cover three basic types of actuator design:
a)those with some form of cast or fabricated yoke to connect the actuator power unit to the valve;
b)those which use some form of central tube yoke to connect the actuator power unit to the valve;
c)those in which the yoke incorporates two or more columns or pillars to connect the actuator power unit to the valve.

Животни циклус

ТРЕНУТНО

ПОВУЧЕН
IEC 60534-6:1985 ED1
95.99 Повучен
8. 10. 2004.

РЕВИДИРАН ОД

НАПУШТЕН
IEC 60534-6 ED2

ОБЈАВЉЕН
IEC 60534-6-1:1997 ED1

ОБЈАВЉЕН
IEC 60534-6-2:2000 ED1