Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

IEC 60695-11-10:1999 ED1

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
13. 8. 2003.

Опште информације

99.60     21. 5. 2013.

IEC

TC 89

Међународни стандард

13.220.40     29.020  

енглески   француски  

Куповина

Ревидиран

Језик на коме желите да примите документ.

Апстракт

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety publication in accordance with Guide 104.

Животни циклус

ПРЕТХОДНО

ПОВУЧЕН
IEC 61300-2-36:1995 ED1

ТРЕНУТНО

ПОВУЧЕН
IEC 60695-11-10:1999 ED1
99.60 Повлачење ступило на снагу
21. 5. 2013.

ИСПРАВКЕ / ИЗМЕНЕ

ПОВУЧЕН
IEC 60695-11-10:1999/AMD1:2003 ED1

РЕВИДИРАН ОД

ОБЈАВЉЕН
IEC 60695-11-10:2013 ED2