Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

ISO 15614-1:2017

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
29. 5. 2017.

Опште информације

90.92     25. 7. 2024.

ISO

ISO/TC 44/SC 10

Међународни стандард

25.160.10  

енглески   француски  

Куповина

Објављен

Језик на коме желите да примите документ.

Апстракт

ISO 15614-1:2017 specifies how a preliminary welding procedure specification is qualified by welding procedure tests.
ISO 15614-1:2017 applies to production welding, repair welding and build-up welding.
ISO 15614-1:2017 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the qualification of this document.
The primary purpose of welding procedure qualification is to demonstrate that the joining process proposed for construction is capable of producing joints having the required mechanical properties for the intended application.
Two levels of welding procedure tests are given in order to permit application to a wide range of welded fabrication. They are designated by levels 1 and 2. In level 2, the extent of testing is greater and the ranges of qualification are more restrictive than in level 1.
Procedure tests carried out to level 2 automatically qualify for level 1 requirements, but not vice-versa.
When no level is specified in a contract or application standard, all the requirements of level 2 apply.
This document applies to the arc and gas welding of steels in all product forms and the arc welding of nickel and nickel alloys in all product forms.
Arc and gas welding are covered by the following processes in accordance with ISO 4063.
111 - manual metal arc welding (metal-arc welding with covered electrode);
114 - self-shielded tubular-cored arc welding;
12 - submerged arc welding;
13 - gas-shielded metal arc welding;
14 - gas-shielded arc welding with non-consumable electrode;
15 - plasma arc welding;
311 - oxy-acetylene welding.
The principles of this document may be applied to other fusion welding processes.
NOTE A former process number does not require a new qualification test according to this document.
Specification and qualification of welding procedures that were made in accordance with previous editions of this document may be used for any application for which the current edition is specified. In this case, the ranges of qualification of previous editions remain applicable.
It is also possible to create a new WPQR (welding procedure qualification record) range of qualification according to this edition based on the existing qualified WPQR, provided the technical intent of the testing requirements of this document has been satisfied. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to perform the additional test on a test piece.

Животни циклус

ПРЕТХОДНО

ПОВУЧЕН
ISO 15614-1:2004

ПОВУЧЕН
ISO 15614-1:2004/Cor 1:2005

ПОВУЧЕН
ISO 15614-1:2004/Amd 1:2008

ПОВУЧЕН
ISO 15614-1:2004/Amd 2:2012

ТРЕНУТНО

ОБЈАВЉЕН
ISO 15614-1:2017
90.92 Одлука о измени или ревизији стандарда
25. 7. 2024.

ИСПРАВКЕ / ИЗМЕНЕ

ОБЈАВЉЕН
ISO 15614-1:2017/Amd 1:2019

НАПУШТЕН
ISO 15614-1:2017/FDAmd 2

РЕВИДИРАН ОД

ПРОЈЕКАТ
ISO/DIS 15614-1

Национална преузимања

Specifikacija i kvalifikacija tehnologije zavarivanja metalnih materijala – Kvalifikacija tehnologije zavarivanja – Deo 1: Elektrolučno i gasno zavarivanje čelika i elektrolučno zavarivanje nikla i legura nikla

60.60   Стандард објављен