Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

SRPS EN IEC 61753-111-08:2021

Оптички склопови за међусобно повезивање и пасивне компоненте – Стандард за перформансе – Део 111‑08: Заптивене спојнице за категорију G – На земљи

Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for Category G - Ground
30.07.2021.

Опште информације

60.60     30.07.2021.

ISS

N086

Европски стандард

33.180.20  

енглески  

Куповина

Објављен

Језик на коме желите да примите документ.

Апстракт

IEC 61752-111-08:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category G - Ground, as defined in Table A.14 of IEC 61753-1:2018. Free breathing closures are not covered in this document. This first edition cancels and replaces IEC 61753-111-8 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-111-8:
a) terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019;
b) test severities updated according to IEC 61753-1:2018;
c) sealing tests are done with 20 kPa overpressure;
d) pass-fail criterion of pressure loss during test added to mechanical sealing tests;
e) vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles;
f) reduced loads added in cable retention test for small diameter cables and tubes;
g) reduced loads for cable axial compression test for small diameter cables;
h) the duration of the cycles in torsion and bending test is added;
i) free fall test removed (is covered by the optical shock test);
j) crush resistance test of 1 000 N for 10 min is added;
k) assembly and disassembly test: duration reduced to 5 cycles;
l) resistance to solvents and contaminating fluids: added immersion in diesel with duration of 1 h and 24 h drying time and added immersion in petroleum jelly for 5 days;
m) resistance to stress cracking solvents added for 5 days;
n) duration of the change of temperature reduced to 12 cycles;
o) water immersion test at 1 m for 7 days added.

Животни циклус

ПРЕТХОДНО

Замењује
SRPS EN 61753-111-8:2010

ТРЕНУТНО

ОБЈАВЉЕН
SRPS EN IEC 61753-111-08:2021
60.60 Стандард објављен
30.07.2021.

Повезани пројекти

Идентичан са EN IEC 61753-111-08:2021

Идентичан са IEC 61753-111-08:2021 ED1 IDENTICAL

Преглед

Да бисте видели цео садржај, морате се регистровати или пријавити помоћу корисничког имена које већ имате.

Пријавите се