Telefon: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Prodaja standarda: prodaja@iss.rs Seminari, obuke: iss-edukacija@iss.rs Informacije o standardima: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Glavni meni

SRPS EN IEC 61753-111-08:2021

Optički sklopovi za međusobno povezivanje i pasivne komponente – Standard za performanse – Deo 111‑08: Zaptivene spojnice za kategoriju G – Na zemlji

Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for Category G - Ground
30.07.2021.

Опште информације

60.60     30.07.2021.

ISS

N086

Evropski standard

33.180.20  

engleski  

Kupovina

Objavljen

Jezik na kome želite da primite dokument.

Apstrakt

IEC 61752-111-08:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category G - Ground, as defined in Table A.14 of IEC 61753-1:2018. Free breathing closures are not covered in this document. This first edition cancels and replaces IEC 61753-111-8 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-111-8:

a) terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019;

b) test severities updated according to IEC 61753-1:2018;

c) sealing tests are done with 20 kPa overpressure;

d) pass-fail criterion of pressure loss during test added to mechanical sealing tests;

e) vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles;

f) reduced loads added in cable retention test for small diameter cables and tubes;

g) reduced loads for cable axial compression test for small diameter cables;

h) the duration of the cycles in torsion and bending test is added;

i) free fall test removed (is covered by the optical shock test);

j) crush resistance test of 1 000 N for 10 min is added;

k) assembly and disassembly test: duration reduced to 5 cycles;

l) resistance to solvents and contaminating fluids: added immersion in diesel with duration of 1 h and 24 h drying time and added immersion in petroleum jelly for 5 days;

m) resistance to stress cracking solvents added for 5 days;

n) duration of the change of temperature reduced to 12 cycles;

o) water immersion test at 1 m for 7 days added.

Životni ciklus

PRETHODNO

Zamenjuje
SRPS EN 61753-111-8:2010

TRENUTNO

OBJAVLJEN
SRPS EN IEC 61753-111-08:2021
60.60 Standard objavljen
30.07.2021.

Povezani projekti

Identičan sa EN IEC 61753-111-08:2021

Identičan sa IEC 61753-111-08:2021 ED1 IDENTICAL

Pregled

Da biste videli ceo sadržaj, morate se registrovati ili prijaviti pomoću korisničkog imena koje već imate.

Prijavite se