Телефон: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Продаја стандарда: prodaja@iss.rs Семинари, обуке: iss-edukacija@iss.rs Информације о стандардима: infocentar@iss.rs
Стевана Бракуса 2, 11030 Београд
Главни мени

delSRPS EN 12516-1:2019/A1:2023

Индустријске арматуре – Чврстоћа кућишта – Део 1: Табеларни поступак за прорачун тела челичне арматуре -Измена 1

Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells

Опште информације

50.98     12. 9. 2018.



Европски стандард




This European Standard specifies the tabulation method for determining the wall thickness of valve bodies, bonnets and covers with essentially circular cross-section made in forged, cast or fabricated steel.
For valve shells with oval, rectangular or non-circular shapes, see 8.6.
The range of PN or Class designations for which thicknesses are tabulated is:
PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400, Class 150, Class 300,Class 600, Class 900, Class 1 500, Class 2 500, Class 4 500.
Pressure/temperature ratings are specified for each material group for the above PN Standard Class and Special Class designations.
The non-destructive examination procedures and acceptance levels that need to be applied to the valve shell components in order for the valve to be used at Special Class pressure/temperature ratings are defined.
Details are also given for the alternative rules for small bore valves of DN 65 and smaller designated as Limited Class.
This standard does not apply to threaded end valves:
- DN 80 or larger;
- or which have pressure ratings greater than Class 2 500;
- or which operate at temperatures greater than 540 °C.
Socket welding end valves DN 80 or larger are outside the scope of this standard.

Повезане директиве

Директиве повезане са овим стандардом

Животни циклус


delSRPS EN 12516-1:2019/A1:2023
50.98 Пројекат се брише из плана рада комисије за стандарде
12. 9. 2018.

Повезани пројекти

Идентичан са EN 12516-1:2014/FprA1