Projects

Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to be supplied by purchaser

90.93   Standard confirmed

Steel cord conveyor belts — Longitudinal traction test — Part 1: Measurement of elongation

90.93   Standard confirmed

Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength

60.60   Standard published

Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment

60.60   Standard published

Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability

90.93   Standard confirmed

Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content

90.93   Standard confirmed

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications

90.93   Standard confirmed

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

90.93   Standard confirmed

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

90.60   Close of review

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 1: General requirements

90.93   Standard confirmed

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)

90.93   Standard confirmed

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)

90.93   Standard confirmed

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)

90.93   Standard confirmed

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)

90.93   Standard confirmed

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m)

90.93   Standard confirmed

Road vehicles — Thermoplastics tubing for air braking systems

90.93   Standard confirmed

Road vehicles — Brake linings — Disc brake pads — Evaluation of surface and material flaws after testing

90.60   Close of review

Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid

90.93   Standard confirmed