Уколико желите да набавите овај документ обратите се на следећу адресу: prodaja@iss.rs
Scope
This document specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this document includes heat pumps.
This Part 2 of this standard is applicable to the design, construction and installation of refrigerating systems including piping, components and materials. It includes ancillary equipment not covered in EN 378 1, EN 378 3 or prEN 378 5 which is directly associated with these systems. It also specifies requirements for testing, commissioning, marking and documentation. Requirements for secondary heat transfer circuits are excluded except for any protection requirements associated with the refrigerating system. Ancillary equipment includes, for example, fans, fan motors, electrical motors and transmission assemblies for open compressor systems.
This document applies to:
a) refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard, e.g. ISO 13043:2011 [1];
b) secondary cooling or heating systems;
c) the location of the refrigerating systems;
d) replaced parts and added components after adoption of this document if they are not identical in function and in the capacity.
Systems using refrigerants other than those listed in prEN 378 5 are not covered by this document.
This document does not apply to goods in storage.
This document is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This document is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This document also applies in the case of the conversion of a system to another refrigerant type.
Designation, classification, and selected properties of the refrigerant such as:
— refrigerant number, e.g. R717;
— safety classes A1, A2L, A2, A3, B1, B2L, B2, B3;
— lower flammability limits (LFL)
are specified in prEN 378 5.
Related directives
NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.
2014/68/EU
Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
