Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

prSRPS EN ISO 898-1:2024

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

General information

10.99    

ISS

M010

European Norm

English  

Scope

ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures.
Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head.
ISO 898-1:2013 is applicable to bolts, screws and studs

made of carbon steel or alloy steel,
having triangular ISO metric screw thread in accordance with ISO 68-1,
with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,
with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and
having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4.

It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5).
It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.

Life cycle

PREVIOUSLY

PUBLISHED
SRPS EN ISO 898-1:2013

NOW

PROJECT
prSRPS EN ISO 898-1:2024
10.99 New project approved

Related project

Adopted from prEN ISO 898-1 rev IDENTICAL

Adopted from ISO/AWI 898-1 IDENTICAL