1.1 This document specifies safety requirements and measures for all types and sizes of mobile elevating work platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis
1.2 This document is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. This document deals with all significant hazards, hazardous situations or hazardous events relevant to MEWPs, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
It does not cover the hazards arising from:
a) use in potentially explosive atmospheres;
b) work from the platform on or within the Minimum Approach Distances of external live electric systems;
c) use of compressed gases for load bearing components;
d) getting on and off the work platform at changing levels;
e) specific applications (e.g. railway, ships) covered by National or local regulations.
1.3 This document does not apply to:
a) machinery serving fixed landings (see e.g. EN 81 20:2020 and EN 81 50:2020, EN 12159:2024);
b) fire-fighting and fire rescue appliances (see e.g. EN 1777:2010);
c) unguided work cages suspended from lifting appliances (see e.g. EN 1808:2015);
d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528:2021+A1:2022);
e) tail lifts (see EN 1756 1:2021 and EN 1756 2:2004+A1:2009);
f) mast climbing work platforms (see EN 1495:1997+A2:2009);
g) fairground equipment;
h) lifting tables (see EN 1570 1:2024 and EN 1570 2:2016);
i) aircraft ground support equipment (see e.g. EN 1915 1:2023 and EN 1915 2:2001+A1:2009);
j) elevating operator positions on industrial trucks (see EN ISO 3691 3:2016).
This document is not applicable to MEWPS manufactured before the date of its publication.
1.4 Classification of MEWPS:
MEWPs are divided into two main groups:
a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination indicated in the information for use is always inside the tipping lines.
b) Group B: All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1) Type 1: Travelling is only allowed with the MEWP in its transport position, or no travelling of the MEWP is possible due to only being moveable (3.1.3) by design;
2) Type 2: Travelling with lifted work platform is controlled from a point of control at the chassis;
3) Type 3: Travelling with lifted work platform is controlled from a point of control at the work platform.
NOTE Type 2 and type 3 can be combined.
Related directives
NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.
