Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN 12545:2010

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

May 26, 2010
May 26, 2010

General information

90.93     Jun 22, 2022

90.00    Jun 22, 2027

ISS

G120

European Norm

17.140.20     59.140.40     61.060  

Serbian  

Buying

Published

Language in which you want to receive the document.

Scope

1.1 This noise test code specifies common requirements necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the noise emission characteristics of the following leather and imitation leather goods and footwear manufacturing machinery:
- Cutting and punching machines (EN 12044);
- Roughing, scouring, polishing and trimming machines (EN 930);
- Footwear moulding machines (EN 1845);
- Lasting machines (EN 931);
- Nailing machines (EN 12653);
- Modular shoe repair equipment (EN 12387);
- Shoe and leather presses (EN 12203);
- Splitting, skiving, cutting, cementing and cement drying machines (EN 13457).
Common requirements given in this standard are complemented by specific requirements on noise given in the above mentioned C-type standards.
1.2 Noise emission characteristics include emission sound pressure levels at workstations and the sound power level.
The determination of these quantities is necessary e.g. for:
- manufacturers to declare the noise emitted;
- comparing the noise emitted by machines in the family concerned;
- purposes of noise control at source at the design stage.
1.3 The use of this noise test code and of the specific requirements on noise given in the relevant C-type standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement standards used. Preferred noise measurement standards are those of engineering grade of accuracy (grade 2):

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.

98/37/EC

Machinery

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized

Life cycle

NOW

PUBLISHED
SRPS EN 12545:2010
90.93 Standard confirmed
Jun 22, 2022

Related project

Adopted from EN 12545:2000+A1:2009

National regulations and standards

"Сл. гласник РС", бр. 22/17 "Сл. гласник РС", бр. 22/2017
SPISAK SRPSKIH STANDARDA IZ OBLASTI MAŠINA

МИНИСТАРСТВО ПОЉОПРИВРЕДЕ И ЗАШТИТЕ ЖИВОТНЕ СРЕДИНЕ

"Сл. гласник РС" бр. 3/2020 Списак српских стандарда из области машина