Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN 1010-2:2009

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

Dec 29, 2009
95.99   Withdrawal of Standard   Aug 29, 2011

General information

95.99     Aug 29, 2011

ISS

H006

European Norm

37.100.10     85.100  

English  

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This document applies to:
- Pre-press machinery (machinery and devices for the production of master copies and printing forms):
- exposure equipment for the production of films and printing forms;
- equipment for developing films and printing forms;
- washing machines for printing forms;
- machines for bending printing forms;
- punching machines for film and printing forms;
- cutting machines for film and printing forms;
- machines for the production of gravure printing forms;
- scanners.
- Printing and varnishing machines:
- proofing presses;
- sheet-fed printing presses and varnishing machines including digital printing presses;
- web-fed rotary presses and varnishing machines including digital printing presses;
- screen printing presses.
- Auxiliary devices:
- cylinder and roller washing devices;
- continuous flow drying devices;
- powder spraying devices;
- auxiliary devices on inking and damping units;
- automatic plate clamping devices;
- washing equipment for printing forms, rollers and scrapers;
- pile turners; reel turners,
- measuring and control devices.
This document shall be used together with prEN 1010-1:2003. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respective requirements in prEN 1010-1:2003.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in prEN 1010-1: 20032
However, this document specifies requirements for noise reduction of corrugated board and flatbed punching machines.
This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates.
This document is not applicable to bookbinding, paper converting and finishing

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.

94/9/EC

Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX)

Harmonized
98/37/EC

Machinery

Life cycle

NOW

WITHDRAWN
SRPS EN 1010-2:2009
95.99 Withdrawal of Standard
Aug 29, 2011

REVISED BY

WITHDRAWN
SRPS EN 1010-2:2011

Related project

Adopted from EN 1010-2:2006