Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN 289:2010

Plastics and rubber machines - Presses - Safety requirements

Nov 29, 2010
95.99   Withdrawal of Standard   Jul 28, 2015

General information

95.99     Jul 28, 2015

ISS

G061

European Norm

83.200  

English  

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This document specifies the essential safety requirements for hydraulic presses, including toggle and hydro-mechanic ones, with a vertical closing movement more than 6 mm for the moulding of plastics and/or rubber.
This document covers both compression moulding (see 3.1.1) and transfer moulding (see 3.1.2).
All hazards listed in clause 4 are covered by this document.
The following machines are excluded:
- injection moulding machines (see EN 201);
- presses for curing pneumatic tyres;
- presses for curing inner tubes and curing bags;
- hydraulic presses as covered by EN 693;
- mechanical presses as covered by EN 692;
- thermoforming machines (see EN 12409);
- RIM machines (see EN 1612-1 and EN 1612-2).
The safety requirements for the additional hazards arising from the interaction between presses and ancillary equipment especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified.
This document does not cover:
- the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres;
- requirements for the design of exhaust ventilation systems.
This document is not applicable to presses manufactured before the date of publication of this document by CEN.

- RIM machines (see EN 1612-1 and EN 1612-2).
The safety requirements for the additional hazards arising from the interaction between presses and ancillary equipment especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified.
This document does not cover:
- the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres;
- requirements for the design of exhaust ventilation systems.
This document is not applicable to presses manufactured before the date of publication of this document by CEN.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.

98/37/EC

Machinery

Harmonized
2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized

Life cycle

NOW

WITHDRAWN
SRPS EN 289:2010
95.99 Withdrawal of Standard
Jul 28, 2015

REVISED BY

PUBLISHED
SRPS EN 289:2015

Related project

Adopted from EN 289:2004+A1:2008