SRPS EN 387:2012

Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements

Scope

This standard specifies requirements for large finger joints and minimum requirements for the production of these in structural members of glued laminated timber also with corner pieces of laminated veneer lumber or plywood with a finger length of at least 45 mm. The glued laminated timber and the laminated veneer lumber shall be made from conifers and poplar. Such finger joints may be employed for joints in straight beams or for frame corners, see Figure 1.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.