90.93 Mar 5, 2019
90.00 Mar 5, 2024
ISS
European Norm
English
The standard is being translated and is in the "10.99 Start" state. view more ...
Published
1.1 This standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of mechanical handling equipment defined in clauses 3.1 to 3.3 and which are designed for continuously conveying bulk materials from the loading point(s) to the unloading point(s).In general, it also applies to equipment which are built into machines or attached to machines. This standard deals with the technical requirements for EMC.
1.2 The standard does not apply to:
- continuous handling equipment and systems for open-cast lignite mining;
- continuous handling equipment and systems for underground mining;
- tunnel digging and excavating machines;
- bulk material processing or classification machines such as grinders, crushers, screens;
- fixed belt conveyors for bulk materials. These are covered by the standard EN 620:2002+A1:2010;
- fixed pneumatic handling equipment. These equipment and systems are covered by the standard EN 741;
- the interface between the machinery dealt with in this standard and the fixed belt or pneumatic conveyor.
1.3 This standard does not give the additional requirements for:
a) use in public areas or for the transportation of people;
b) floating, dredging and ship mounted equipment;
c) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals;
d) transportation of the equipment;
e) hazards caused by vibration;
f) use in ambient air temperature below - 20 °C and above + 40 °C;
g) the effects of wind on strength and stability;
h) hazards resulting from handling specific hazardous materials, (e.g. Explosives, radiating material);
i) hazards resulting from contact with or inhalation of harmful fluids, gas, mists, fumes and dusts;
j) biological and micro-biological (viral or bacterial) hazards;
k) hazards due to heat radiation from the materials handled;
NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
HarmonizedDirective 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
HarmonizedDirective 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Harmonized
WITHDRAWN
SRPS EN 618:2009
PUBLISHED
SRPS EN 618:2011
90.93
Standard confirmed
Mar 5, 2019
МИНИСТАРСТВО ПОЉОПРИВРЕДЕ И ЗАШТИТЕ ЖИВОТНЕ СРЕДИНЕ
МИНИСТАРСТВО ПРИВРЕДЕ