Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN 267:2012

Automatic forced draught burners for liquid fuels

May 23, 2012
95.99   Withdrawal of Standard   Feb 28, 2020

General information

95.99     Feb 28, 2020

ISS

M057

European Norm

27.060.10  

English  

Van plana za 2012

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to automatic forced draught oil burners supplied with:
- a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and
- higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation.
This European Standard is applicable to:
- single burners fitted to a single combustion chamber;
- single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account;
- single-fuel and dual-fuel burners when operating on oil only;
- the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J.
This European Standard also deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K.
This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard does not deal with hazards due to specific applications.
This European Standard is not applicable to automatic forced draught oil burners which are manufactured before the date of its publication as European Standard.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.

97/23/EC

Pressure equipment

Harmonized
2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized
2014/68/EU

Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment

Harmonized

Life cycle

PREVIOUSLY

PUBLISHED
SRPS M.F8.013:1990

WITHDRAWN
SRPS EN 267:2011

NOW

WITHDRAWN
SRPS EN 267:2012
95.99 Withdrawal of Standard
Feb 28, 2020

REVISED BY

PUBLISHED
SRPS EN 267:2020

Related project

Adopted from EN 267:2009+A1:2011

National regulations and standards

"Сл. гласник РС" бр. 87/2011 "Сл. гласник РС" бр. 87/2011
Pravilnik o tehničkim zahtevima za projektovanje, izradu i ocenjivanje usaglašenosti jednostavnih posuda pod pritiskom

MINISTARSTVO ZA INFRASTRUKTURU I

"Сл. гласник РС", бр. 22/17 "Сл. гласник РС", бр. 22/2017
SPISAK SRPSKIH STANDARDA IZ OBLASTI MAŠINA

МИНИСТАРСТВО ПОЉОПРИВРЕДЕ И ЗАШТИТЕ ЖИВОТНЕ СРЕДИНЕ

"Сл. гласник РС" бр. 3/2020 Списак српских стандарда из области машина