SRPS EN 14592:2023

Timber structures - Dowel-type fasteners - Requirements

Scope

This document specifies the characteristics of the following types of dowel-type fasteners:
- nails;
- staples;
- screws;
- dowels;
- bolts with nuts.
This document covers dowel-type fasteners for structural use in load bearing timber structures only. This document covers also the following additional intended uses of the screws:
- to fix roof or cladding elements to the timber structure, with or without insulation layers; and
- as reinforcement inserted in timber or in a glue laminated timber element to improve its resistance to compression perpendicular to the grain.
This document covers types of dowel-type fasteners, which are manufactured of either carbon steel or stainless steel and which may be coated for the following purposes:
- corrosion protection (as Type 1 coating);
- lubrication, to facilitate insertion (as Type 2 coating);
- withdrawal enhancement and/or collation for nails and staples (adhesive and/or resin coatings) (as Type 3 coating).
This document covers types of dowel-type fasteners, which are manufactured from materials and within the specifications for their geometry related properties, only as they are specified for:
- nails (see G.1);
- staples (see G.2);
- screws (see G.3);
- dowels (see G.4); and
- bolts with nuts (see G.5).
This document specifies also the assessment and verification of constancy of performance (AVCP) procedures of these characteristics and includes provisions for marking of dowel-type fasteners.
This document does not cover dowel-type fasteners treated with fire retardants to improve their fire performance, nor does it cover glued-in rods.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.