delSRPS EN 1337-5:2017

Structural bearings - Part 5: Pot bearings

Scope

This document specifies rules for the design, testing and manufacture of fixed and sliding pot bearings.
It is applicable to pot bearings:
- with elastomeric pads made from natural rubber (NR) or chloroprene rubber (CR) up to 1 500 mm diameter,
- with pot and piston made from ferrous materials,
- with seals tested for different accumulated slide paths due to rotations between piston and pot of a) 500 m, b) 1 000 m or c) 2 000 m,
- with seals made from specific austenitic steel, brass, POM or carbon filled PTFE,
- subjected to operating temperature ranges between -25 °C and +50 °C or -40 °C and +50 °C,
- subjected to operating temperatures up to +70 °C for repeated periods of less than 8 h.
This document will be used in conjunction with prEN 1337-1:2018 and other relevant parts of the prEN 1337 series.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.