PRAVILNIK o tehničkim zahtevima za hemijske dodatke betonu, mlaznom betonu, malteru i injekcionoj masi za kablove za prethodno naprezanje

Railway applications - Wheel/Rail friction management - Part 2-3: Properties and Characteristics - Adhesion materials

95.99   Withdrawal of Standard

Methods of testing cement - Determination of strength

95.99   Withdrawal of Standard

Methods of testing cement - Determination of setting time and soundness

95.99   Withdrawal of Standard

Methods of testing cements - Determination of strength - Amendments

95.99   Withdrawal of Standard

Methods of testing cement - Part 1: Determination of strength

95.99   Withdrawal of Standard

Methods of testing cement - Part 3: Determination of setting times and soundness

95.99   Withdrawal of Standard

Masonry cement - Part 2: Test methods

95.99   Withdrawal of Standard

Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices

95.99   Withdrawal of Standard

Soil improvers and growing media - Determination of particle size distribution

90.93   Standard confirmed

Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars

90.93   Standard confirmed

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

90.93   Standard confirmed

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

60.60   Standard published

Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)

90.93   Standard confirmed

Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar

90.93   Standard confirmed

Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar

60.60   Standard published

Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar

90.60   Close of review

Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar

90.20   Standard under periodical review

Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar

60.60   Standard published

Testing fresh concrete - Part 2: Slump test

95.99   Withdrawal of Standard

Testing fresh concrete - Part 5: Flow table test

95.99   Withdrawal of Standard

Testing fresh concrete - Part 6: Density

95.99   Withdrawal of Standard

Testing fresh concrete - Part 7: Air content - Pressure methods

95.99   Withdrawal of Standard

Testing hardened concrete - Part 3: Compressive strength of test specimens

95.99   Withdrawal of Standard

Testing hardened concrete - Part 7: Density of hardened concrete

95.99   Withdrawal of Standard

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

95.99   Withdrawal of Standard

Sweepers - Part 1: Classification and Terminology

90.93   Standard confirmed

Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes

90.93   Standard confirmed

Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements

95.99   Withdrawal of Standard

Methods of testing cement - Part 3: Determination of setting times and soundness

95.99   Withdrawal of Standard

Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement

95.99   Withdrawal of Standard

Testing fresh concrete - Part 5: Flow table test

95.99   Withdrawal of Standard

Testing fresh concrete - Part 2: Slump-test

95.99   Withdrawal of Standard

Testing fresh concrete - Part 6: Density

95.99   Withdrawal of Standard

Testing fresh concrete - Part 7: Air content - Pressure methods

95.99   Withdrawal of Standard

Testing hardened concrete - Part 3: Compressive strength of test specimens

95.99   Withdrawal of Standard

Testing hardened concrete - Part 7: Density of hardened concrete

95.99   Withdrawal of Standard

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

95.99   Withdrawal of Standard

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

90.93   Standard confirmed

Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling

90.93   Standard confirmed

Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity

95.99   Withdrawal of Standard

Grout for prestressing tendons - Test methods

90.60   Close of review

Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete

90.93   Standard confirmed

Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption

90.93   Standard confirmed

Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete

90.93   Standard confirmed

Ventilation for buildings - Fire precautions for air distribution systems in buildings

90.93   Standard confirmed

Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm <a <6 mm

60.60   Standard published

Railway applications - Wheel/rail friction management - Flange lubrication

95.99   Withdrawal of Standard

Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) - Technical specification

60.60   Standard published

Candles - Specification for sooting behaviour

95.99   Withdrawal of Standard

Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

95.99   Withdrawal of Standard

Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test

90.93   Standard confirmed

Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW

95.99   Withdrawal of Standard

Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard

60.60   Standard published

Concrete — Specification, performance, production and conformity – Rules for the implementation of SRPS EN 206-1

95.99   Withdrawal of Standard

Sweepers - Part 2: Performance requirements and test methods

90.93   Standard confirmed

Testing hardened concrete - Part 3: Compressive strength of test specimens

95.99   Withdrawal of Standard

Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation

90.93   Standard confirmed

Sweepers - Part 4: Symbols for operator controls and other displays

90.93   Standard confirmed

Methods of testing cement - Part 1: Determination of strength

90.92   Standard to be revised

Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement

60.60   Standard published

Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements

95.99   Withdrawal of Standard

Testing fresh concrete - Part 6: Density

10.98   New project rejected

Testing fresh concrete - Part 2: Slump-test

95.99   Withdrawal of Standard

Testing fresh concrete - Part 5: Flow table test

95.99   Withdrawal of Standard

Testing hardened concrete - Part 3: Compressive strength of test specimens

95.99   Withdrawal of Standard

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

95.99   Withdrawal of Standard

Masonry cement - Part 2: Test methods

90.93   Standard confirmed

Masonry cement - Part 2: Test methods

90.93   Standard confirmed

Methods of testing cement - Part 3: Determination of setting times and soundness

90.93   Standard confirmed

Methods of testing cement - Part 3: Determination of setting times and soundness

90.93   Standard confirmed

Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method

90.93   Standard confirmed

Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance

90.60   Close of review

Testing fresh concrete - Part 2: Slump test

90.60   Close of review

Testing hardened concrete - Part 7: Density of hardened concrete

90.60   Close of review

Testing fresh concrete - Part 6: Density

90.60   Close of review

Testing fresh concrete - Part 7: Air content - Pressure methods

90.60   Close of review

Testing hardened concrete - Part 3: Compressive strength of test specimens

90.60   Close of review

Testing fresh concrete - Part 5: Flow table test

90.60   Close of review

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

90.60   Close of review

Candles - Specification for sooting behaviour

90.93   Standard confirmed

Concrete — Guidance and rules for national technical requirements for production of concrete applied in concrete, reinforced concrete and prestressed concrete structures

60.60   Standard published

Methods of testing cement - Part 1: Determination of strength

90.92   Standard to be revised

Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement

60.60   Standard published

Testing hardened concrete - Part 3: Compressive strength of test specimens

95.99   Withdrawal of Standard

Railway applications - Wheel/Rail friction management - Part 1-1: Equipment and Application - Flange Lubricants

60.60   Standard published

Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants

60.60   Standard published

Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method

90.93   Standard confirmed

Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

60.60   Standard published