Failure is considered to have occurred when a conducting path is formed in the material; failure is also considered to have occurred if the arc causes a material to burn and the burning continues when the arc is interrupted. NOTE 1 – When the arc disappears into the material, the circuit current usually changes and a noticeable change in sound takes place. NOTE 2 – For some materials, the trend towards failure increases over a fairly long interval of time before all parts of the arc between the electrodes have disappeared. Failure only occurs when the entire arc has disappeared. NOTE 3 – For some materials, a persistent scintillation may be observed close to the electrodes after the arc has disappeared. This scintillation shall not be considered as part of the arc. NOTE 4 – Burning of the material accompanying the arc is only considered as failure if the burning continues between arc interruptions. Otherwise the test is continued until a conducting path is formed. NOTE 5 – The first disappearance of the entire arc is considered as failure even if the material recovers for subsequent arcing.
сматра се да отказ настаје када се створи проводна стаза у материјалу; такође се сматра да до отказа долази ако лук изазове сагоревање материјала, а горење се наставља када се лук прекине
НАПОМЕНА 1 Када лук нестане у материјалу, струја кола се обично мења и долази до приметне промене звука.
НАПОМЕНА 2 Код неких материјала, тренд отказа се повећава током прилично дугог временског периода пре него што сви делови лука нестану између електрода. Отказ настаје само када нестане цео лук.
НАПОМЕНА 3 Код неких материјала, може да се уочи непрекидно светлуцање у близини електрода и после нестанка лука. Ово светлуцање се не сматра делом лука.
НАПОМЕНА 4 Сагоревање материјала које прати лук сматра се отказом само ако се горење наставља између прекида лука. У супротном, испитивање се наставља до формирања проводне стазе.
НАПОМЕНА 5 Први нестанак читавог лука се сматра отказом чак и ако се материјал опорави за следеће деловање лука.