SRPS ISO 22915-10:2025

Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

Scope

This document specifies an additional test for verifying the stability of a laden truck fitted with a powered load-handling device, such as a sideshift, which can displace the centre of gravity laterally to a substantial, predetermined extent from the longitudinal centre plane of the truck or from the centred position. Such devices are used in this mode for depositing and retrieving a load.
A displacement is considered to be a substantial displacement if it is more than:
—    100 mm, for a truck with a rated capacity < 5 000 kg;
—    150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg;
—    250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg;
—    350 mm, for a truck with a rated capacity ≥ 20 000 kg;
This document is applicable to the following types of trucks as defined in ISO 5053-1:
a)    counterbalance trucks;
b)    reach and straddle trucks;
c)    pallet stackers;
d)    bidirectional and multidirectional trucks;
e)    industrial variable-reach trucks;
f)     rough-terrain trucks with mast;
g)    rough-terrain variable reach trucks;
h)    counterbalance trucks with articulated steering;
i)     variable-reach container handler;
j)     counterbalanced container handler.