Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN 14753:2009

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

Apr 27, 2009
95.99   Withdrawal of Standard   Nov 30, 2022

General information

95.99     Nov 30, 2022

ISS

M199

European Norm

77.180  

English  

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This European Standard applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1 and illustrated in Annex B.
This European Standard deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment.
This European Standard assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant.
This European Standard assumes that the machinery is used with adequate workplace lighting conforming to EN 12464-1.
NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1.
This European Standard applies to:
CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular, beam blank, circular)
 from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car);
via casting process;
via cutting equipment;
to the run-out-area where the cut product is collected.
This European Standard does not cover safety requirements for:
auxiliary plants (e.g. water treatment, refractory handling);
ladles;
cranes;
winches and hoists;
conveyors or handling systems.
This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.

Related directives

NOTE: If the word "harmonized" (marked in green) is not found in the field with the name of the directive, it means that the European standard is not cited in the OJEU.

98/37/EC

Machinery

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized

Life cycle

NOW

WITHDRAWN
SRPS EN 14753:2009
95.99 Withdrawal of Standard
Nov 30, 2022

REVISED BY

PUBLISHED
SRPS EN 14753:2022

Related project

Adopted from EN 14753:2007

National regulations and standards

"Сл. гласник РС", бр. 22/17 "Сл. гласник РС", бр. 22/2017
SPISAK SRPSKIH STANDARDA IZ OBLASTI MAŠINA

МИНИСТАРСТВО ПОЉОПРИВРЕДЕ И ЗАШТИТЕ ЖИВОТНЕ СРЕДИНЕ

"Сл. гласник РС" бр. 3/2020 Списак српских стандарда из области машина