Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN ISO 11704:2019

Water quality - Gross alpha and gross beta activity - Test method using liquid scintillation counting (ISO 11704:2018)

May 31, 2019

General information

60.60     May 31, 2019

ISS

H147

European Norm

13.060.20     13.060.60     17.240  

English  

Buying

Published

Language in which you want to receive the document.

Scope

This document specifies a method for the determination of gross alpha and gross beta activity concentration for alpha- and beta-emitting radionuclides using liquid scintillation counting (LSC).
The method is applicable to all types of waters with a dry residue of less than 5 g/l and when no correction for colour quenching is necessary.
Gross alpha and gross beta activity measurement is not intended to give an absolute determination of the activity concentration of all alpha- and beta-emitting radionuclides in a test sample, but is a screening analysis to ensure particular reference levels of specific alpha and beta emitters have not been exceeded. This type of determination is also known as gross alpha and beta index. Gross alpha and beta analysis is not expected to be as accurate nor as precise as specific radionuclide analysis after radiochemical separations.
The method covers non-volatile radionuclides below 80 °C, since some gaseous or volatile radionuclides (e.g. radon and radioiodine) can be lost during the source preparation.
The method is applicable to test samples of drinking water, rain water, surface and ground water as well as cooling water, industrial water, domestic and industrial waste water after proper sampling and test sample preparation (filtration when necessary and taking into account the amount of dissolved material in the water).
The method described in this document is applicable in the event of an emergency situation, because the results can be obtained in less than 4 h by directly measuring water test samples without any treatment.
It is the laboratory's responsibility to ensure the suitability of this test method for the water samples tested.

Life cycle

PREVIOUSLY

WITHDRAWN
SRPS EN ISO 11704:2016

NOW

PUBLISHED
SRPS EN ISO 11704:2019
60.60 Standard published
May 31, 2019

REVISED BY

PROJECT
prSRPS EN ISO 11704:2024

Related project

Adopted from EN ISO 11704:2018

Adopted from ISO 11704:2018 IDENTICAL