SPISAK srpskih standarda iz oblasti elektromagnetske kompatibilnosti

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 1: General rules

95.99   Withdrawal of Standard

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

95.99   Withdrawal of Standard

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

95.99   Withdrawal of Standard

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection

95.99   Withdrawal of Standard

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

60.60   Standard published

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

95.99   Withdrawal of Standard

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

90.93   Standard confirmed

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

90.93   Standard confirmed

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

60.60   Standard published

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

95.99   Withdrawal of Standard

Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

60.60   Standard published

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

60.60   Standard published

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches

60.60   Standard published

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

60.60   Standard published

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

95.99   Withdrawal of Standard

Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

95.99   Withdrawal of Standard

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

95.99   Withdrawal of Standard

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

60.60   Standard published

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission

90.93   Standard confirmed

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity

90.93   Standard confirmed

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

60.60   Standard published

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

95.99   Withdrawal of Standard

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)

90.93   Standard confirmed

Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility

60.60   Standard published

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

95.99   Withdrawal of Standard

Electronic taximeters

60.60   Standard published

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods

95.99   Withdrawal of Standard

Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements

60.60   Standard published

Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

95.99   Withdrawal of Standard

Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements

90.93   Standard confirmed

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

90.92   Standard to be revised

Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods

90.93   Standard confirmed

Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

60.60   Standard published

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

60.60   Standard published

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

60.60   Standard published

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

90.60   Close of review

Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

60.60   Standard published

Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

60.60   Standard published

Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

60.60   Standard published

Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches

60.60   Standard published

Programmable controllers - Part 2: Equipment requirements and tests

60.60   Standard published

Railway applications - Electromagnetic compatibility - Part 1: General

95.99   Withdrawal of Standard

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

95.99   Withdrawal of Standard

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

95.99   Withdrawal of Standard

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

95.99   Withdrawal of Standard

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

95.99   Withdrawal of Standard

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules

95.99   Withdrawal of Standard

Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements

95.99   Withdrawal of Standard

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)

60.60   Standard published

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

95.99   Withdrawal of Standard

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements

95.99   Withdrawal of Standard

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

60.60   Standard published

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

60.60   Standard published

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

60.60   Standard published

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

95.99   Withdrawal of Standard

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

95.99   Withdrawal of Standard

Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps

60.60   Standard published

Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)

60.60   Standard published

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

95.99   Withdrawal of Standard

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

60.60   Standard published

Equipment for general lighting purposes - EMC immunity requirements

60.60   Standard published

Construction machinery - Electromagnetic compatibility of machines with internal power supply

95.99   Withdrawal of Standard

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

60.60   Standard published

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment

60.60   Standard published

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment

60.60   Standard published

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

60.60   Standard published

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

60.60   Standard published

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 1: General rules

95.99   Withdrawal of Standard

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles

60.60   Standard published

EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires

95.99   Withdrawal of Standard

EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables

95.99   Withdrawal of Standard

Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

90.93   Standard confirmed

Power frequency overvoltage protective device for household and similar applications (POP)

95.99   Withdrawal of Standard

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

90.93   Standard confirmed

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

95.99   Withdrawal of Standard

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

95.99   Withdrawal of Standard

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

95.99   Withdrawal of Standard

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

95.99   Withdrawal of Standard

Information technology equipment - Immunity characteristics - Limits and methods of measurement

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

95.99   Withdrawal of Standard

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances

90.93   Standard confirmed

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

95.99   Withdrawal of Standard

Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses

95.99   Withdrawal of Standard

Rotating electrical machines - Part 1: Rating and performance

60.60   Standard published

Time relays for industrial and residential use - Part 1: Requirements and tests

60.60   Standard published

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

95.99   Withdrawal of Standard

Power frequency overvoltage protective device for household and similar applications (POP)

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

60.60   Standard published

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

95.99   Withdrawal of Standard

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

60.60   Standard published

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

90.93   Standard confirmed

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

90.93   Standard confirmed

Electromagnetic compatibility of multimedia equipment - Emission requirements

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase

60.60   Standard published

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

60.60   Standard published

Road traffic signal systems - Electromagnetic compatibility

60.60   Standard published

Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)

95.99   Withdrawal of Standard

Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements

95.99   Withdrawal of Standard

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements

60.60   Standard published

Automatic electrical controls for household and similar use - Part 1: General requirements

60.60   Standard published

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods

95.99   Withdrawal of Standard

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

60.60   Standard published

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

60.60   Standard published

Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

60.60   Standard published

General requirements for arc fault detection devices

60.60   Standard published

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

60.60   Standard published

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

60.60   Standard published

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)

60.60   Standard published

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

95.99   Withdrawal of Standard

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

60.60   Standard published

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet

60.60   Standard published

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)

60.60   Standard published

Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

60.60   Standard published

Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use

60.60   Standard published

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

95.99   Withdrawal of Standard

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

95.99   Withdrawal of Standard

Electromagnetic compatibility and Radio spectrum Matters (ERM);Telecommunication network equipment;ElectroMagnetic Compatibility (EMC) requirements

60.60   Standard published

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

60.60   Standard published

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

60.60   Standard published

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

60.60   Standard published

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

95.99   Withdrawal of Standard

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

60.60   Standard published

Electromagnetic compatibility of multimedia equipment - Emission requirements

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 1: General rules

95.99   Withdrawal of Standard

Power frequency overvoltage protective device for household and similar applications (POP)

95.99   Withdrawal of Standard

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

60.60   Standard published

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements

60.60   Standard published

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission

95.99   Withdrawal of Standard