PRAVILNIK o izmenama Pravilnika o klasifikaciji, pakovanju, obeležavanju i oglašavanju hemikalije i određenog proizvoda u skladu sa Globalno harmonizovanim sistemom za klasifikaciju i obeležavanje UN

Mineral oils and other combustible liquids - Determination of flash point by the closed tester - Abel-Pensky method

95.99   Withdrawal of Standard

Tea — Sampling

90.93   Standard confirmed

Gas cylinders — Precautionary labels

95.99   Withdrawal of Standard

Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets

95.99   Withdrawal of Standard

Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking

95.99   Withdrawal of Standard

Determination of flash point - Rapid equilibrium closed cup method (ISO 3679:2004)

95.99   Withdrawal of Standard

Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)

90.93   Standard confirmed

Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002)

95.99   Withdrawal of Standard

Aerospace series - Qualification and approval of personnel for non-destructive testing

95.99   Withdrawal of Standard

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

90.93   Standard confirmed

Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking

95.99   Withdrawal of Standard

Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)

90.93   Standard confirmed

Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)

95.99   Withdrawal of Standard

Determination of flash point - Abel closed-cup method (ISO 13736:2008)

95.99   Withdrawal of Standard

Cold-reduced carbon steel sheet of commercial and drawing qualities

95.99   Withdrawal of Standard

Testing of mineral oils and other combustible liquids - Determination of flash point by the closed tester according to Abel-Pensky

90.93   Standard confirmed

Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2004)

95.99   Withdrawal of Standard

Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2007)

95.99   Withdrawal of Standard

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005)

95.99   Withdrawal of Standard

Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004)

90.93   Standard confirmed

Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification

60.60   Standard published

Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series

90.93   Standard confirmed

Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

90.93   Standard confirmed

Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

90.93   Standard confirmed

Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2010)

95.99   Withdrawal of Standard

Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series

60.60   Standard published

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - 1 100 MPa (at ambient temperature) / 315 °C

95.99   Withdrawal of Standard

Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)

60.60   Standard published

Standard test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter

95.99   Withdrawal of Standard

Aerospace series - Qualification and approval of personnel for non-destructive testing

95.99   Withdrawal of Standard

Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index

90.93   Standard confirmed

Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking

90.93   Standard confirmed

Determination of flash point - Abel closed-cup method (ISO 13736:2013)

95.99   Withdrawal of Standard

Cold-reduced carbon steel sheet of commercial and drawing qualities

90.93   Standard confirmed

Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

60.60   Standard published

Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)

95.99   Withdrawal of Standard

Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)

60.60   Standard published

Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016)

95.99   Withdrawal of Standard

Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2017)

60.60   Standard published

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C

60.60   Standard published

Aerospace series - Qualification and approval of personnel for non-destructive testing

95.99   Withdrawal of Standard

Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)

60.60   Standard published

Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)

95.99   Withdrawal of Standard

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)

60.60   Standard published

Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017)

60.60   Standard published

Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2019)

60.60   Standard published

Determination of flash point - Abel closed-cup method (ISO 13736:2021)

60.60   Standard published

Aerospace series - Qualification and approval of personnel for non-destructive testing

60.60   Standard published

Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)

60.60   Standard published

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C

10.99   New project approved