Phone: (011) 7541-421, 3409-301, 3409-335, 6547-293, 3409-310
E-mail: Standards sales: prodaja@iss.rs Education: iss-edukacija@iss.rs Information about standards: infocentar@iss.rs
Stevana Brakusa 2, 11030 Beograd
Main menu

SRPS EN ISO 2719:2017

Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)

Jun 26, 2017

General information

60.60     Jun 26, 2017

ISS

B028-2

European Norm

75.080     75.100  

English  

Zbog novih obaveza ISS-a prema CEN-u na 28. sednici je dogovoreno da se standard usvoji na engleskom jeziku, pa će se naknadno usvojiti njegov prevod. usvojen na 28. sednici

Buying

Published

Language in which you want to receive the document.

Scope

ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard.
NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2].
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13].
ISO 2719:2016 is not applicable to water-borne paints and varnishes.
NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

Related directives

Directives related to this standard.

2008/68/EC

Directive 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods

Life cycle

PREVIOUSLY

Replaces
SRPS EN ISO 2719:2008

NOW

PUBLISHED
SRPS EN ISO 2719:2017
60.60 Standard published
Jun 26, 2017

Related project

Adopted from EN ISO 2719:2016

Adopted from ISO 2719:2016

Preview

To view the full content, you need to register or to log in to your account by clicking on the "Log in" button

Login