Pravilnik o tehničkim i drugim uslovima za projektovanje i građenje železničkih pruga i postrojenja, uređaja i objekata na magistralnim prugama

Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

90.93   Standard confirmed

Railway applications - Track - Performance requirements for fastening systems - Part 7: Fastening systems for switches and crossings, check rails, insulated rail joints and rail expansion devices

60.60   Standard published

Railway applications - Infrastructure - Flash butt welding of new rails - Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant

60.60   Standard published

Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood and polymeric composite sleepers

60.60   Standard published

Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for ballastless tracks

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption under diffuse sound field conditions

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse sound field applications

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions

60.60   Standard published

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne sound insulation under direct sound field conditions

60.60   Standard published

Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings

60.60   Standard published

Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2 (ISO 17892-12:2018/Amd 2:2022)

60.60   Standard published

Railway applications - Gauges - Part 2: Rolling stock

60.60   Standard published

Railway applications - Gauges - Part 3: Infrastructure

60.60   Standard published

Railway applications - Infrastructure - Flash butt welding of rails - Part 3: Welding in association with crossing construction

40.60   Close of voting

Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ventilation ducts and fire dampers and/or power, control and communication cables

50.60   Close of voting. Proof returned by secretariat

Railway applications - Ballastless track systems - Part 4: Special ballastless track systems for attenuation of vibration

45.99   Dispatch of FV draft to CCMC

Geotechnical investigation and testing — Laboratory testing of soil — Part 13: Swelling test for Soils, Hard Soils and Soft Rocks — Procedure with cycles on a single specimen

10.99   New project approved

Types of insurance of side slope embankments, cuttings and foot embankments

90.60   Close of review

Testing of soil - Determination of deformation by circular plate load test

90.92   Standard to be revised

Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers

95.99   Withdrawal of Standard

Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers

95.99   Withdrawal of Standard

Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings

95.99   Withdrawal of Standard

Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 1: Definitions

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 5: Switches

95.99   Withdrawal of Standard

Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings

95.99   Withdrawal of Standard

Railway applications - Track - Rail - Part 3: Check rails

90.93   Standard confirmed

Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance

95.99   Withdrawal of Standard

Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions

95.99   Withdrawal of Standard

Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line

95.99   Withdrawal of Standard

Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature

95.99   Withdrawal of Standard

Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing

60.60   Standard published

Eurocode 7: Geotechnical design - Part 1: General rules

60.60   Standard published

Execution of special geotechnical works - Reinforced fill

90.93   Standard confirmed

Aggregates for railway ballast

60.60   Standard published

Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions

90.60   Close of review

Railway applications - Track - Wood sleepers and bearers

90.93   Standard confirmed

Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)

60.60   Standard published

Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)

60.60   Standard published

Geotextiles and geotextile-related products - Characteristics required for use in drainage systems

90.93   Standard confirmed

Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways

90.93   Standard confirmed

Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures

90.93   Standard confirmed

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

90.93   Standard confirmed

Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

90.93   Standard confirmed

Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)

60.60   Standard published

Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements

90.93   Standard confirmed

Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers

95.99   Withdrawal of Standard

Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes

90.93   Standard confirmed

Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above

60.60   Standard published

Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider

90.93   Standard confirmed

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

60.60   Standard published

Railway applications - Ballastless track systems - Part 1: General requirements

90.93   Standard confirmed

Railway applications - Infrastructure - Flash butt welding of new rails - Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant

90.60   Close of review

Railway applications - Ballastless track systems - Part 2: System design, subsystems and components

90.93   Standard confirmed

Aggregates for railway ballast

50.98   Project deleted

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

50.98   Project deleted

Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures

90.93   Standard confirmed

Railway applications - Infrastructure - Under ballast mats

60.60   Standard published

Railway applications - Track - Switches and crossings for Vignole rails - Part 8: Expansion devices

60.60   Standard published

Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds

60.60   Standard published

Railway applications - Infrastructure - Mechanical requirements for joints in running rails

60.60   Standard published

Railway applications - Platform barrier systems

60.60   Standard published

Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels

60.60   Standard published

Railway applications - Ballastless track systems - Part 3: Acceptance

60.60   Standard published