Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 μm core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850 nm using selected A1a fibre only
IEC 61755-6-2: 2018 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connectors with cylindrical ferrules intended to be used for attenuation measurements in the field or factory. One grade of reference connector is defined in this document. The reference connector is terminated to selected IEC 60793-2-10:2015 A1a fibre. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.
Keywords: optical interface, fibre-to-fibre interconnection
Životni ciklus
TRENUTNO
POVUČEN IEC 61755-6-2:2018 ED1 99.60
Povlačenje stupilo na snagu 25. 6. 2025.
Optički sklopovi za međusobno povezivanje i pasivne komponente – Optički interfejsi konektora – Deo 6-2: Povezivanje multimodnih vlakana prečnika jezgra od 50 μm koja se fizički dodiruju – Primena kod nezakošenih referentnih konektora, na talasnoj dužini od 850 nm, korišćenjem isključivo izabranih A1a optičkih vlakana
