ISO 8130-11:2019

Coating powders — Part 11: Inclined-plane flow test

Datum objavljivanja: 1. 4. 2019.

Опште информације

Trenutna faza: 90.93 Effective date: 3. 1. 2025.

Inicijator: ISO

Pripada: ISO/TC 35/SC 9

Vrsta: Međunarodni standard

ICS: 87.040

Jezik: engleski francuski

Kupovina

Status: Objavljen

PDF

Papir

PDF i papir

Jezik

Jezik na kome želite da primite dokument.

Apstrakt

This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal.
The aim of the test method described in this document gives an indication of the degree of melt flow that can occur during the curing of the coating powder. This characteristic contributes to the surface appearance and to the degree of coverage over sharp edges.
The test is a comparative method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected.
This method is not suitable for coating powders which have gel times of less than 1 min at the test temperature when characterised according to ISO 8130‑6. This method is also not suitable for textured powders.

Životni ciklus

PRETHODNO

POVUČEN
ISO 8130-11:1997

TRENUTNO

OBJAVLJEN
ISO 8130-11:2019
90.93 Odluka o potvrđivanju standarda
3. 1. 2025.

Nacionalna preuzimanja

SRPS EN ISO 8130-11:2019

ISS

Materijali za prevlaku u prahu – Deo 11: Ispitivanje tečenja na kosoj ravni

60.60 Standard objavljen

H035 Saznaj više