ISO 20669:2017

Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components

Datum objavljivanja: 13. 3. 2017.

Опште информације

Trenutna faza: 90.93 Effective date: 25. 3. 2025.

Inicijator: ISO

Pripada: ISO/TC 135/SC 4

Vrsta: Međunarodni standard

ICS: 19.100

Jezik: engleski francuski

Kupovina

Status: Objavljen

PDF

Papir

PDF i papir

Jezik

Jezik na kome želite da primite dokument.

Apstrakt

ISO 20669:2017 specifies the pulsed eddy current (PEC) testing technique used to perform thickness measurement on ferromagnetic metallic components with or without the presence of coating, insulation and weather sheeting.
ISO 20669:2017 applies to the testing of in-service components made of carbon steel and low-alloy steel in the temperature of −100 °C to 500 °C (temperature measured at metal surface). The range of wall thickness of components is from 3 mm to 65 mm and the range of thickness of coatings is from 0 mm to 200 mm. The tested components also include piping of diameter not less than 50 mm.
The technique described in this document is sensitive to the geometry of the component and applying the technique to components outside of its scope will result in unpredictable inaccuracy. This document does not apply to the testing of crack defects and local metal loss caused by pitting.
ISO 20669:2017 does not establish evaluation criteria. The evaluation criteria shall be specified by the contractual agreement between parties.

Životni ciklus

TRENUTNO

OBJAVLJEN
ISO 20669:2017
90.93 Odluka o potvrđivanju standarda
25. 3. 2025.

REVIDIRAN OD

PROJEKAT
ISO/PWI 20669