ISO 2081:2018 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.
ISO 2081:2018 is not applicable to zinc coatings applied
- to sheet, strip or wire in the non-fabricated form,
- to close-coiled springs, or
- for purposes other than protective or decorative.
ISO 2081:2018 does not specify requirements for the surface condition of the basis metal prior to electroplating with zinc. However, defects in the surface of the basis metal can adversely affect the appearance and performance of the coating.
The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.
OBJAVLJEN
ISO 2081:2018
PROJEKAT
ISO/FDIS 2081
50.20
Početak postupka odobravanja definitivnog teksta nacrta standarda
23. 7. 2025.
Metalne i druge neorganske prevlake – Elektrolitičke prevlake cinka sa obradama pomoću rastvora koje sadrže hrom (VI) na gvožđu ili čeliku
50.20 Početak postupka odobravanja definitivnog teksta nacrta standarda
Da biste videli ceo sadržaj, morate se registrovati ili prijaviti pomoću korisničkog imena koje već imate.