Testing of ceramic materials — Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP-OES) or ion chromatography (IC) after burning in the oxygen flow
This document specifies a method for the determination of sulfur in non-oxidic ceramic raw materials and ceramic materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials.
For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur.
This document is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method.
For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP-OES) and 5 mg/kg in the case of ion chromatography (IC) can be considered as a practical value.
Ispitivanje keramičkih materijala — Određivanje sumpora u neoksidnim keramičkim sirovinama i keramičkim materijalima — Deo 2: optička emisiona spektrometrija sa induktivno spregnutom plazmom (ICP-OES) ili jonska hromatografija (IC) nakon sagorevanja u struji kiseonika
50.60Završetak postupka odobravanja definitivnog teksta nacrta standarda
