prSRPS EN ISO 898-11:2026

Fasteners - Mechanical properties of fasteners made of non- alloy and low-alloy steel — Part 11: Bolts, screws and studs with nominal diameters 39 mm < d ≤ 100 mm and specified property classes

Apstrakt

This document specifies the mechanical and physical properties of bolts, screws and studs with nominal diameters above 39 mm and up to 100 mm, made of low-alloy steel. Fasteners (the term used when bolts, screws and studs are considered all together) conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C (except impact test which is carried out at –20 °C). It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures.

This document applies to bolts, screws and studs with full loadability and with:
— triangular ISO metric thread in accordance with ISO 68-1,
— diameter/pitch combinations in accordance with ISO 261,
— coarse pitch thread for M42 to M68,
— fine pitch thread for M423 to M1006,
— thread tolerances in accordance with ISO 965-1, -2 or -4.

This document does not specify requirements for functional properties such as:
— torque/clamp force properties (see ISO 16047 for test method),
— resistance to shear stress,
— corrosion resistance (see e.g. ISO 4042, ISO 10683 or ISO 10684),
— fatigue resistance, or
— weldability.