PRAVILNIK o analizatorima za merenje sadržaja proteina u žitu

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60   Standard published

Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000)

95.99   Withdrawal of Standard

Environmental testing - Part 2-1: Tests - Test A: Cold

60.60   Standard published

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth

60.60   Standard published

Environmental testing - Part 2: Tests - Test Q: Sealing

60.60   Standard published

Environmental testing - Part 2-18: Tests - Tests R and guidance: Water

95.99   Withdrawal of Standard

Environmental testing - Part 2-2: Tests - Test B: Dry heat

60.60   Standard published

Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests

60.60   Standard published

Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

60.60   Standard published

Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

60.60   Standard published

Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers

60.60   Standard published

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

95.99   Withdrawal of Standard

Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2006)

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

95.99   Withdrawal of Standard

Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads

95.99   Withdrawal of Standard

Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

95.99   Withdrawal of Standard

Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2006)

95.99   Withdrawal of Standard

Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

60.60   Standard published

Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

60.60   Standard published

Environmental testing - Part 2-14: Tests - Test N: Change of temperature

60.60   Standard published

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads

95.99   Withdrawal of Standard

Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO/TS 16634-2:2009)

95.99   Withdrawal of Standard

Cereals and cereal products - Determination of moisture content - Reference method (ISO 712:2009)

95.99   Withdrawal of Standard

Maize - Determination of moisture content (on milled grains and on whole grains) (ISO 6540:1980)

95.99   Withdrawal of Standard

Cereals and cereal products - Sampling (ISO 24333:2009)

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs)

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

95.99   Withdrawal of Standard

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

95.99   Withdrawal of Standard

Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

60.60   Standard published

Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013)

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60   Standard published

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

60.60   Standard published

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads

90.92   Standard to be revised

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

60.60   Standard published

Environmental testing - Part 2-18: Tests – Test R and guidance: Water

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

95.99   Withdrawal of Standard

Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

30.98   Project deleted

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

60.60   Standard published

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth

60.60   Standard published

Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

60.60   Standard published

Cereals and cereal products - Determination of moisture content - Reference method

30.98   Project deleted

Maize - Determination of moisture content (on milled grains and on whole grains) (ISO 6540:2021)

60.60   Standard published

Oilseeds - Determination of moisture and volatile matter content (ISO 665:2020)

60.60   Standard published

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60   Standard published