Projekti

Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by the three-point method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials for the production of aluminium — Anodes, cathodes blocks, sidewall blocks and baked ramming pastes — Determination of the thermal conductivity using a comparative method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 1: Loss in mass method

90.93   Odluka o potvrđivanju standarda

Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 2: Thermogravimetric method

90.93   Odluka o potvrđivanju standarda

Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles

90.93   Odluka o potvrđivanju standarda

Plastics — Vertical flame spread determination for film and sheet

90.93   Odluka o potvrđivanju standarda

Electrodeposited nickel plus chromium coatings for automobile plastic parts — Specification and test requirements

60.60   Standard objavljen

Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints

90.93   Odluka o potvrđivanju standarda

Mechanical joining — Guidelines for fatigue testing of joints

60.60   Standard objavljen

Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation

90.93   Odluka o potvrđivanju standarda

Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption

90.93   Odluka o potvrđivanju standarda

Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation

90.20   Početak postupka preispitivanja standarda

Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties

90.20   Početak postupka preispitivanja standarda

Carbon fibre — Designation system for filament yarns

90.60   Završetak postupka preispitivanja standarda

Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions

90.93   Odluka o potvrđivanju standarda