Projekti

Fibre optic interconnecting devices and passive components - Performance standard - Part 022-07: Hardened fibre optic connectors terminated on multimode fibre cable for category A – Outdoor aerial environment

10.20   Početak izjašnjavanja o predlogu

IEC 63412-3: Ultrasonics - Shear-wave elastography - Part 3: Procedures for performance and constancy testing

00.00   Podnet predlog novog projekta

Wind Energy Generation Systems – Part 18: Design Guideline for Pitch Bearings

00.99   Predlog novog projekta se prihvata

Wind energy generation systems - Part 15-2: Framework for assessment and reporting of the wind resource and energy yield

10.60   Završetak izjašnjavanja o predlogu

Wind Energy Generation Systems - Part 33: Bird mortality prevention strategies. Bird Detection and Identification Systems

00.00   Podnet predlog novog projekta

Grid Connection Requirements for Converter-Based Resources Interconnecting with Bulk Power Systems

10.20   Početak izjašnjavanja o predlogu

Technical Specification for Automatic Voltage Control of Power System with Integration of lBR (Inverter based Resource)

10.20   Početak izjašnjavanja o predlogu

Technical Specification for System Restoration of Interconnected Power Systems Using VSC-HVDC

10.20   Početak izjašnjavanja o predlogu

Guidelines for assessment of power system resilience

10.20   Početak izjašnjavanja o predlogu

Railway Applications – Urban Guided Transport Management And Command/Control Systems – Part 4: Interface specifications

10.20   Početak izjašnjavanja o predlogu

Standardization of Heat-Loss Measurement of ancillary systems to maintain the superconducting state, such as thermal insulation pipe and/or cryostat for superconducting cables and current leads

00.00   Podnet predlog novog projekta

Materials for printed boards and other interconnecting structures - Part 2-XX: Reinforced base materials clad and unclad – Non-halogenated epoxide modified bismaleimide/triazine with filler woven glass laminate sheets of low thermal expansion and flammability (vertical burning test), copper-clad for IC substrate

10.60   Završetak izjašnjavanja o predlogu

Materials for circuit boards and other interconnecting structures - Part 3-X: Sectional specification set for unreinforced base materials, clad and unclad - Build-up film of defined dissipation factor (greater than 0,0030 and equal to or less than 0,0050 at 10 GHz) for rigid organic package substrate, unclad

10.60   Završetak izjašnjavanja o predlogu

Test method for electrical materials, circuit board and other interconnection structures and assemblies - Part 2-X: Test methods for interconnection structures - Test methods for relative permeability and magnetic loss tangent of magnetic dielectric materials for circuit boards at 1 MHz to 1 GHz using impedance analyzer

10.60   Završetak izjašnjavanja o predlogu

Thermography test method for printed circuit interconnection defects

10.60   Završetak izjašnjavanja o predlogu

Materials for circuit boards and other interconnecting structures - Part 3-X: Sectional specification set for unreinforced base materials, clad and unclad – Build-up film of defined dissipation factor (greater than 0,0050 and equal to or less than 0,0080 at 10 GHz) for rigid organic package substrate, unclad

10.60   Završetak izjašnjavanja o predlogu

Materials for circuit boards and other interconnecting structures - Part 3-X: Sectional specification set for unreinforced base materials, clad and unclad – Build-up film of defined dissipation factor (greater than 0,0080 and equal to or less than 0,0200 at 10 GHz) for rigid organic package substrate, unclad

10.60   Završetak izjašnjavanja o predlogu

Circuit Board 2D Barcode Marking Requirements

10.60   Završetak izjašnjavanja o predlogu