SPISAK SRPSKIH STANDARDA IZ OBLASTI MAŠINA

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

60.60   Standard published

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

90.93   Standard confirmed

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)

95.99   Withdrawal of Standard

Cranes - Information for use and testing - Part 1: Instructions

90.93   Standard confirmed

Cranes - Information for use and testing - Part 2: Marking

90.93   Standard confirmed

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices

95.99   Withdrawal of Standard

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60   Standard published

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

90.93   Standard confirmed

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

90.93   Standard confirmed

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007)

60.60   Standard published

Maintenance for lifts and escalators - Rules for maintenance instructions

90.93   Standard confirmed

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

60.60   Standard published

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

90.93   Standard confirmed

Winter service machines - Safety requirements

95.99   Withdrawal of Standard

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV

95.99   Withdrawal of Standard

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines

90.93   Standard confirmed

Machines for road surface cleaning - Safety requirements

95.99   Withdrawal of Standard

Floor cutting-off machines - Safety

95.99   Withdrawal of Standard

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60   Standard published

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60   Standard published

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

90.92   Standard to be revised

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

95.99   Withdrawal of Standard

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

95.99   Withdrawal of Standard

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

60.60   Standard published

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

90.92   Standard to be revised

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

90.60   Close of review

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

90.60   Close of review

Lifting bag systems for fire and rescue service use - Safety and performance requirements

90.93   Standard confirmed

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

90.60   Close of review

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

95.99   Withdrawal of Standard

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

95.99   Withdrawal of Standard

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles

95.99   Withdrawal of Standard

Automatic forced draught burners for gaseous fuels

95.99   Withdrawal of Standard

Components for slings - Safety - Part 1: Forged steel components, Grade 8

90.60   Close of review

Cranes - Safety - Non-fixed load lifting attachments

95.99   Withdrawal of Standard

Cranes - Safety - Hand powered cranes

90.92   Standard to be revised

Cranes - Controls and control stations

95.99   Withdrawal of Standard

Cranes - Access

95.99   Withdrawal of Standard

Cranes - Manually controlled load manipulating devices

90.93   Standard confirmed

Cranes - Safety - Tower cranes

60.60   Standard published

Cranes - Requirements for container handling spreaders

90.92   Standard to be revised

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

90.93   Standard confirmed

Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional

95.99   Withdrawal of Standard

Safety of packaging machines - Part 7: Group and secondary packaging machines

90.93   Standard confirmed

Safety of packaging machines - Part 8: Strapping machines

95.99   Withdrawal of Standard

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

60.60   Standard published

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

60.60   Standard published

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

60.60   Standard published

Coating plants - Combined booths - Safety requirements

95.99   Withdrawal of Standard

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

60.60   Standard published

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

95.99   Withdrawal of Standard

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

90.20   Standard under periodical review

Steel wire ropes - Safety - Part 1: General requirements

90.60   Close of review

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

90.92   Standard to be revised

Steel wire ropes - Safety - Part 3: Information for use and maintenance

95.99   Withdrawal of Standard

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

90.92   Standard to be revised

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

90.60   Close of review

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

90.60   Close of review

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

95.99   Withdrawal of Standard

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

90.93   Standard confirmed

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

90.60   Close of review

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

95.99   Withdrawal of Standard

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

90.93   Standard confirmed

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

90.93   Standard confirmed

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

90.93   Standard confirmed

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

60.60   Standard published

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

95.99   Withdrawal of Standard

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

95.99   Withdrawal of Standard

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

90.93   Standard confirmed

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

90.60   Close of review

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

90.93   Standard confirmed

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

90.60   Close of review

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

90.92   Standard to be revised

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

90.92   Standard to be revised

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

90.60   Close of review

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

90.92   Standard to be revised

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers

90.93   Standard confirmed

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

90.93   Standard confirmed

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

90.93   Standard confirmed

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

90.93   Standard confirmed

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

90.93   Standard confirmed

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

90.93   Standard confirmed

Footwear manufacturing machines - Lasting machines - Safety requirements

90.93   Standard confirmed

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

90.93   Standard confirmed

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances

60.60   Standard published

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

60.60   Standard published

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators

60.60   Standard published

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

95.99   Withdrawal of Standard

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

60.60   Standard published

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

60.60   Standard published

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

60.60   Standard published

Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 1 (ISO 9902-2:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 1 (ISO 9902-3:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 9902-4:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery - Amendment 1 (ISO 9902-5:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 9902-6:2001/Amd 1:2009)

95.99   Withdrawal of Standard

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 9902-7:2001/Amd 1:2009)

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

90.93   Standard confirmed

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

90.93   Standard confirmed

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

95.99   Withdrawal of Standard

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

90.93   Standard confirmed

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

90.93   Standard confirmed

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

90.93   Standard confirmed

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

95.99   Withdrawal of Standard

Agricultural machinery - Vine shoot tipping machines - Safety

90.93   Standard confirmed

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

95.99   Withdrawal of Standard

Agricultural machinery - Potato harvesting equipment - Safety

95.99   Withdrawal of Standard

Industrial, commercial and garage doors and gates - Installation and use

95.99   Withdrawal of Standard

Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods

95.99   Withdrawal of Standard

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

90.93   Standard confirmed

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

60.60   Standard published

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

90.93   Standard confirmed

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

95.99   Withdrawal of Standard

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

90.60   Close of review

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory

90.93   Standard confirmed

Ceramic machines - Safety - Transfer platforms and cars

90.93   Standard confirmed

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

95.99   Withdrawal of Standard

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)

90.93   Standard confirmed

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

90.92   Standard to be revised

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

90.60   Close of review

Components for slings - Safety - Part 4: Links, Grade 8

90.93   Standard confirmed

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

90.93   Standard confirmed

Components for slings - Safety - Part 6: Links - Grade 4

90.93   Standard confirmed

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

90.60   Close of review

Safety of machinery - Human physical performance - Part 1: Terms and definitions

90.93   Standard confirmed

Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation

90.93   Standard confirmed

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet

90.93   Standard confirmed

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method

90.93   Standard confirmed

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles

90.20   Standard under periodical review

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

95.99   Withdrawal of Standard

Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

90.93   Standard confirmed

Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

90.93   Standard confirmed

Safety of machinery - Human body measurements - Part 3: Anthropometric data

90.93   Standard confirmed

Safety of machinery - Two-hand control devices - Functional aspects - Principles for design

95.99   Withdrawal of Standard

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

90.93   Standard confirmed

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

90.93   Standard confirmed

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

90.93   Standard confirmed

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

60.60   Standard published

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

95.99   Withdrawal of Standard

Safety of Machinery - Safety requirements for hot flat rolling mills

95.99   Withdrawal of Standard

Safety of Machinery - Safety requirements for cold flat rolling mills

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for pressure metal diecasting units

90.92   Standard to be revised

Foundry machinery - Safety requirements for abrasive blasting equipment

95.99   Withdrawal of Standard

Safety of machinery - Noise test code for foundry machines and equipment

90.60   Close of review

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

90.93   Standard confirmed

Tannery machines - Rotating process vessels - Safety requirements

90.93   Standard confirmed

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

90.93   Standard confirmed

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

90.92   Standard to be revised

Mobile or movable jacks and associated lifting equipment

90.93   Standard confirmed

Lifting platforms - Mast climbing work platforms

90.92   Standard to be revised

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals

60.60   Standard published

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

95.99   Withdrawal of Standard

Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

95.99   Withdrawal of Standard

Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009)

60.60   Standard published

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines - Amendment 1 (ISO 11111-2:2005/Amd 1:2009)

60.60   Standard published

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 11111-4:2005/Amd 1:2009)

60.60   Standard published

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)

60.60   Standard published

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 11111-6:2005/Amd 1:2009)

60.60   Standard published

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 11111-7:2005/Amd 1:2009)

60.60   Standard published

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

95.99   Withdrawal of Standard

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

95.99   Withdrawal of Standard

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

95.99   Withdrawal of Standard

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain

95.99   Withdrawal of Standard

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

95.99   Withdrawal of Standard

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements

95.99   Withdrawal of Standard

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

90.20   Standard under periodical review

Machine tools - Safety - Stationary grinding machines

95.99   Withdrawal of Standard

Safety of machine tools - Pneumatic presses

95.99   Withdrawal of Standard

Machine tools - Safety - Sawing machines for cold metal

95.99   Withdrawal of Standard

Machine tools - Safety - Guillotine shears

90.60   Close of review

Safety of machine tools - Transfer and special-purpose machines

95.99   Withdrawal of Standard

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

90.92   Standard to be revised

Safety of escalators and moving walks - Part 1: Construction and installation

95.99   Withdrawal of Standard

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

95.99   Withdrawal of Standard

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes

90.92   Standard to be revised

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

60.60   Standard published

Acoustics - Noise test code for fastener driving tools - Engineering method

90.93   Standard confirmed

Automatic forced draught burners for gaseous fuels

95.99   Withdrawal of Standard

Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods

90.92   Standard to be revised

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction

90.92   Standard to be revised

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors

95.99   Withdrawal of Standard

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

90.93   Standard confirmed

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

90.92   Standard to be revised

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

90.60   Close of review

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

90.93   Standard confirmed

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

90.93   Standard confirmed

Centrifuges - Common safety requirements

95.99   Withdrawal of Standard

Cranes - Power driven winches and hoists - Part 1: Power driven winches

90.93   Standard confirmed

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

95.99   Withdrawal of Standard

Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

90.60   Close of review

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)

60.60   Standard published

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

60.60   Standard published

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

95.99   Withdrawal of Standard

Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

60.60   Standard published

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

60.60   Standard published

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

60.60   Standard published

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

60.60   Standard published

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

60.60   Standard published

Screens for laser working places - Safety requirements and testing

90.60   Close of review

Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers

60.60   Standard published

Plastics and rubber machines - Injection moulding machines - Safety requirements

95.99   Withdrawal of Standard

Plastics and rubber machines - Blow moulding machines - Safety requirements

90.93   Standard confirmed

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

95.99   Withdrawal of Standard

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

95.99   Withdrawal of Standard

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators

95.99   Withdrawal of Standard

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders

95.99   Withdrawal of Standard

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

95.99   Withdrawal of Standard

Plastics and rubber machines - Internal mixers - Safety requirements

95.99   Withdrawal of Standard

Plastics and rubber machines - Calenders - Safety requirements

95.99   Withdrawal of Standard

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements

90.20   Standard under periodical review

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

90.20   Standard under periodical review

Machine tools - Mechanical presses - Safety

95.99   Withdrawal of Standard

Machine tools - Safety - Machining centres

95.99   Withdrawal of Standard

Safety of machine tools - Drilling machines

90.60   Close of review

Safety of machine tools - Milling machines (including boring machines)

95.99   Withdrawal of Standard

Rail dependent storage and retrieval equipment - Safety requirements

95.99   Withdrawal of Standard

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

90.93   Standard confirmed

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks

90.93   Standard confirmed

Pumps and pump units for liquids - Common safety requirements

90.93   Standard confirmed

Safety of machinery - Visual danger signals - General requirements, design and testing

90.93   Standard confirmed

Safety of machinery - System of auditory and visual danger and information signals

90.93   Standard confirmed

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

90.60   Close of review

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery

90.93   Standard confirmed

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

90.60   Close of review

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

90.93   Standard confirmed

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

90.20   Standard under periodical review

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

90.20   Standard under periodical review

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

90.20   Standard under periodical review

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method

90.20   Standard under periodical review

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

90.93   Standard confirmed

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method

90.93   Standard confirmed

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index

90.93   Standard confirmed

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

90.93   Standard confirmed

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

60.60   Standard published

Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)

60.60   Standard published

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

90.93   Standard confirmed

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

90.93   Standard confirmed

Masonry and stone cutting-off machines for job site - Safety

95.99   Withdrawal of Standard

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

60.60   Standard published

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

90.93   Standard confirmed

Safety of machinery - Safety requirements for strip processing line machinery and equipment

95.99   Withdrawal of Standard

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)

60.60   Standard published

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)

60.60   Standard published

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

60.60   Standard published

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

95.99   Withdrawal of Standard

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

60.60   Standard published

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

60.60   Standard published

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

60.60   Standard published

Safety of industrial trucks - Additional requirements for automated functions on trucks

95.99   Withdrawal of Standard

Safety of industrial trucks - Test methods for measuring noise emissions

90.93   Standard confirmed

Safety of industrial trucks - Test methods for measuring vibration

90.93   Standard confirmed

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

90.20   Standard under periodical review

Agricultural machinery - Slurry tankers - Safety

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Reel machines for irrigation - Safety

90.93   Standard confirmed

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

90.93   Standard confirmed

Agricultural machinery - Trailers with tipping body - Safety

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

95.99   Withdrawal of Standard

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Inter-row mowing units - Safety

90.93   Standard confirmed

Agricultural and forestry machinery - Seed drills - Safety

95.99   Withdrawal of Standard

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

90.93   Standard confirmed

Powered hand-held hedge trimmers - Safety (ISO 10517:2009)

95.99   Withdrawal of Standard

Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 3: Requirements for loaders

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 8: Requirements for graders

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

95.99   Withdrawal of Standard

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

95.99   Withdrawal of Standard

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

90.60   Close of review

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

90.60   Close of review

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

90.60   Close of review

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)

90.60   Close of review

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

90.60   Close of review

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

90.60   Close of review

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers

60.60   Standard published

Core drilling machines on stand - Safety

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

90.93   Standard confirmed

Ceramic machines - Safety - Loading and unloading of fine clay tiles

90.93   Standard confirmed

Transportable wall saw and wire saw equipment for job site - Safety

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

90.93   Standard confirmed

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

90.93   Standard confirmed

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

95.99   Withdrawal of Standard

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

90.93   Standard confirmed

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

95.99   Withdrawal of Standard

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

90.93   Standard confirmed

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

90.93   Standard confirmed

Mobile road construction machinery - Safety - Part 1: Common requirements

90.93   Standard confirmed

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

60.60   Standard published

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

60.60   Standard published

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

60.60   Standard published

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

60.60   Standard published

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

60.60   Standard published

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

60.60   Standard published

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

90.93   Standard confirmed

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

60.60   Standard published

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance

90.93   Standard confirmed

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

95.99   Withdrawal of Standard

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

95.99   Withdrawal of Standard

Agricultural machinery - Front loaders - Safety

90.93   Standard confirmed

Garden equipment - Integrally powered shredders/chippers - Safety

90.93   Standard confirmed

Agricultural machinery - Silos stationary unloaders for round silos - Safety

90.93   Standard confirmed

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

95.99   Withdrawal of Standard

Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures

95.99   Withdrawal of Standard

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

95.99   Withdrawal of Standard

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

95.99   Withdrawal of Standard

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

95.99   Withdrawal of Standard

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

90.60   Close of review

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

90.93   Standard confirmed

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

90.93   Standard confirmed

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

90.60   Close of review

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements

90.60   Close of review

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

90.60   Close of review

Cranes - Power driven winches and hoists - Part 1: Power driven winches

60.60   Standard published

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

95.99   Withdrawal of Standard

Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)

95.99   Withdrawal of Standard

Safety of machinery - Integral lighting of machines

95.99   Withdrawal of Standard

Food processing machinery - Slicing machines - Safety and hygiene requirements

95.99   Withdrawal of Standard

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Baguette slicers - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Bread slicers - Safety and hygiene requirements

60.60   Standard published

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Salad dryers - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Mixing machines - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Curing injection machines - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements

60.60   Standard published

Food processing machinery - Clipping machines - Safety and hygiene requirements

95.99   Withdrawal of Standard

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Beam mixers - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

60.60   Standard published

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

95.99   Withdrawal of Standard

Food processing machinery - Mincing machines - Safety and hygiene requirements

95.99   Withdrawal of Standard

Food processing machinery - Circular saw machines - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements

90.92   Standard to be revised

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

95.99   Withdrawal of Standard

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

90.60   Close of review

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

60.60   Standard published

Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements

90.60   Close of review

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

95.99   Withdrawal of Standard

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

90.92   Standard to be revised

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

95.99   Withdrawal of Standard

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

60.60   Standard published

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders

60.60   Standard published

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

60.60   Standard published

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

95.99   Withdrawal of Standard

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)

95.99   Withdrawal of Standard

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

60.60   Standard published

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

60.60   Standard published

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

60.60   Standard published

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

60.60   Standard published

Safety of packaging machines - Part 5: Wrapping machines

90.93   Standard confirmed

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

90.93   Standard confirmed

Safety of packaging machines - Part 3: Form, fill and seal machines

95.99   Withdrawal of Standard

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

95.99   Withdrawal of Standard

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

95.99   Withdrawal of Standard

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

90.93   Standard confirmed

Safety in electroheating installations - Part 1: General requirements

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners

95.99   Withdrawal of Standard

Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements

90.60   Close of review

Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders

95.99   Withdrawal of Standard

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment

60.60   Standard published

Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts

60.60   Standard published

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

95.99   Withdrawal of Standard

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

95.99   Withdrawal of Standard

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

95.99   Withdrawal of Standard

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)

60.60   Standard published

Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers

60.60   Standard published

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60   Standard published

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

90.93   Standard confirmed

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

90.93   Standard confirmed

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

95.99   Withdrawal of Standard

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

95.99   Withdrawal of Standard

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

60.60   Standard published

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

60.60   Standard published

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines

90.60   Close of review

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

60.60   Standard published

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

60.60   Standard published

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

90.93   Standard confirmed

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

95.99   Withdrawal of Standard

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

95.99   Withdrawal of Standard

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

95.99   Withdrawal of Standard

Vehicle lifts

95.99   Withdrawal of Standard

Safety of machinery - Integrated manufacturing systems - Basic requirements - Amendment 1 (ISO 11161:2007/Amd 1:2010)

60.60   Standard published

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

60.60   Standard published

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)

60.60   Standard published

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

60.60   Standard published

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators

90.93   Standard confirmed

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment

90.60   Close of review

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

90.60   Close of review

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

90.60   Close of review

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

60.60   Standard published

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

90.93   Standard confirmed

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)

95.99   Withdrawal of Standard

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

60.60   Standard published

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

60.60   Standard published

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

90.60   Close of review

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

95.99   Withdrawal of Standard

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

60.60   Standard published

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

90.60   Close of review

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

60.60   Standard published

High pressure water jet machines - Safety requirements - Part 1: Machines

95.99   Withdrawal of Standard

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines

60.60   Standard published

Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines

95.99   Withdrawal of Standard

Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers

60.60   Standard published

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

95.99   Withdrawal of Standard

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

95.99   Withdrawal of Standard

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

95.99   Withdrawal of Standard

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

60.60   Standard published

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

95.99   Withdrawal of Standard

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)

95.99   Withdrawal of Standard

Equipment and components intended for use in potentially explosive atmospheres in underground mines

95.99   Withdrawal of Standard

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

95.99   Withdrawal of Standard

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

95.99   Withdrawal of Standard

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems

95.99   Withdrawal of Standard

Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles

95.99   Withdrawal of Standard

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

90.93   Standard confirmed

Tannery machines - Roller coating machines - Safety requirements

90.93   Standard confirmed

Tannery machines - Reciprocating roller machines - Safety requirements

90.93   Standard confirmed

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

90.60   Close of review

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

90.93   Standard confirmed

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

60.60   Standard published

Equipment and components intended for use in potentially explosive atmospheres in underground mines

95.99   Withdrawal of Standard

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

95.99   Withdrawal of Standard

Machine tools - Safety - Hydraulic presses

95.99   Withdrawal of Standard

Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging

90.93   Standard confirmed

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

95.99   Withdrawal of Standard

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

95.99   Withdrawal of Standard

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

60.60   Standard published

Automatic forced draught burners for liquid fuels

95.99   Withdrawal of Standard

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

60.60   Standard published

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

60.60   Standard published

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

60.60   Standard published